HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 58
Account lockout policy for SNMPv3 user accounts
Message:
<device type>: Account Lockout Policy enabled; time="<timestamp>" account=SNMPv3
user="<user>" source_IP="<client computer IP address>" outcome=success interface=<interface>
Interface(s):
SNMP
Syslog severity:
Informational
Explanation:
The account lockout policy for SNMPv3 user accounts was enabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - User who enabled the account lockout policy.
<client computer IP address> - IP address of the client computer that sent the request to enable
the account lockout policy.
<interface> - Networking interface on the local device that received the request to modify the
account lockout policy. Possible values are:
• Wired
• AP
• STA
Message:
<device type>: Account Lockout Policy disabled; time="<timestamp>" account=SNMPv3
user="<user>" source_IP="<client computer IP address>" outcome=success interface=<interface>
Interface(s):
SNMP
Syslog severity:
Informational
Explanation:
The account lockout policy for SNMPv3 user accounts was disabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - User who disabled the account lockout policy.
<client computer IP address> - IP address of the client computer that sent the request to disable
the account lockout policy.
<interface> - Networking interface on the local device that received the request to modify the
account lockout policy. Possible values are:
• Wired
• AP
• STA
Message:
<device type>: Account Lockout Policy setting modified; time="<timestamp>" account=SNMPv3
item=maximum_login_attempts value= "<value>" old_value= "<old value>" user="<user>"
source_IP="<client computer IP address>" outcome=success interface=<interface>
Interface(s):
SNMP
Syslog severity:
Informational
Explanation:
The maximum attempts setting for the SNMPv3 user account lockout policy was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value.
<old value> - Old setting value.