HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 63
<client computer IP address> - IP address of the client computer that sent the request to modify
the minimum password length policy.
Minimum password length policy for SNMPv3 authentication passphrase
Message:
<device type>: Minimum Password Length Policy modified; time="<timestamp>" account=SNMPv3
item=minimum_password_length value="<value>" old_value="old value>" user="<user>"
source_IP="<client computer IP address>" outcome=success interface=<interface>
Interface(s):
SNMPv3
Syslog severity:
Informational
Explanation:
The minimum password length policy for the SNMPv3 authentication passphrase was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value.
NOTE: New setting value of zero (0) indicates the minimum password policy was disabled.
<old value> - Old setting value.
<user> - Authenticated user who modified the minimum password length policy. If an
unauthenticated user modified the minimum password length policy, the user key-value pair is
not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to modify
the minimum password length policy.
<interface> - Networking interface on the local device that received the request to modify the
minimum password length policy. Possible values are:
• Wired
• AP
• STA
Date and time settings
DST settings
Message:
<device type>: Date and Time configuration modified; time="<timestamp>"
item=adjust_for_daylight_savings value=enabled old_value=disabled user="<user>"
source_IP="<client computer IP address>" outcome=success
Interface(s):
EWS, WS*, CP, SNMPv3
Syslog severity:
Informational
Explanation:
Date and time settings were configured to adjust for daylight savings.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - Authenticated user who enabled adjust for daylight savings. If an unauthenticated user
enabled adjust for daylight savings, the user key-value pair is not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to enable
adjust for daylight savings.
Message:
<device type>: Date and Time configuration modified; time="<timestamp>"
item=adjust_for_daylight_savings value=disabled old_value=enabled user="<user>"
source_IP="<client computer IP address>" outcome=success
Interface(s):
EWS, WS*, CP, SNMPv3