HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 64
Syslog severity:
Informational
Explanation:
Date and time settings were configured to not adjust for daylight savings.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - Authenticated user who disabled adjust for daylight savings. If an unauthenticated user
disabled adjust for daylight savings, the user key-value pair is not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to disable
adjust for daylight savings.
Message:
<device type>: Date and Time configuration modified; time="<timestamp>" item=<item>
value=<value> old_value=<old value> user="<user>" source_IP="<client computer IP address>"
outcome=success
Interface(s):
EWS, WS*, CP, SNMPv3
Syslog severity:
Informational
Explanation:
A daylight savings time setting was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<item> - Setting that was modified. Possible values are:
• DST_start_occurrence
• DST_start_week_day
• DST_start_month
• DST_start_hour
• DST_end_occurrence
• DST_end_week_day
• DST_end_month
• DST_end_hour
• DST_offset_minutes
<value> - New setting value.
<old value> - Old setting value.
<user> - Authenticated user who modified the setting. If an unauthenticated user modified the
setting, the user key-value pair is not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to modify
the setting.
Message:
<device type>: Date and Time configuration modified; time="<timestamp>"
item=DST_settings_reset_to_factory_defaults user="<user>" source_IP="<client computer IP
address>" outcome=success
Interface(s):
EWS, WS*, CP, SNMPv3
Syslog severity:
Informational
Explanation:
The daylight savings time settings were reset to factory defaults.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - Authenticated user who reset the daylight savings time settings to factory defaults. If an
unauthenticated user reset the daylight savings time settings to factory defaults, the user key-
value pair is not contained within the message.