HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 68
<client computer IP address> - IP address of the client computer that sent the request to set,
clear, or modify the device administrator password.
<interface> - Device networking interface on which the device configuration request was received.
Possible values are:
• Wired
• AP
• STA
Service access code
Message:
<device type>: Service User PIN modified; time="<timestamp>" source_IP="<client computer IP
address>" outcome=success
Interface(s):
EWS, WS*
Syslog severity:
Informational
Explanation:
The service user PIN (a.k.a. service access code) was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<client computer IP address> - IP address of the client computer that sent the request to modify
the service access code.
Message:
<device type>: Service User PIN modified; time="<timestamp>" source_IP="<client IP address>"
outcome=failure
Interface(s):
EWS, WS*
Syslog severity:
Warning
Explanation:
An attempt to modify the service user PIN (a.k.a. service access code) was unsuccessful.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<client computer IP address> - IP address of the client computer that sent the request to modify
the service access code.
Remote configuration password
Message:
<device type>: Remote Configuration Password modified; time="<timestamp>" user="<user>"
source_IP="<client computer IP address>" outcome=success
Interface(s):
EWS, WS*
Syslog severity:
Informational
Explanation:
The remote configuration password was set, cleared, or modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - Authenticated user who set, cleared, or modified the remote configuration password. If
an unauthenticated user set, cleared, or modified the remote configuration password, the user
key-value pair is not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to set, clear,
or modify the remote configuration password.
Message:
<device type>: Remote Configuration Password modified; time="<timestamp>" user="<user>"
source_IP="<client computer IP address>" outcome=failure