HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 69
Interface(s):
EWS, WS*
Syslog severity:
Warning
Explanation:
An attempt to set, clear, or modify the remote configuration password was unsuccessful.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<user> - Authenticated user who attempted to set, clear, or modify the remote configuration
password. If an unauthenticated user attempted to set, clear, or modify the remote configuration
password , the user key-value pair is not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to set,
clear, or modify the remote configuration password.
Cross-site request forgery (CRSF) prevention
Message:
<device type>: Cross-site Request Forgery (CSRF) prevention modified; time="<timestamp>"
value=<value> old_value=<old value> user="<user>" source_IP="<client computer IP address>"
outcome=success
Interface(s):
EWS, WS*
Syslog severity:
Informational
Explanation:
Cross-site request forgery prevention was either enabled or disabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value. Possible values are:
• enable
• disable
<old value> - Old setting value. Possible values are:
• enable
• disable
<user> - Authenticated user who enabled or disabled cross-site request forgery prevention. If an
unauthenticated user enabled or disabled cross-site request forgery, the user key-value pair is
not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to enable or
disable cross-site request forgery.
EWS session timeout
Message:
<device type>: EWS Session Timeout modified; time="<timestamp>" value=<value>
old_value=<old value> user="<user>" source_IP="<client computer IP address>"
outcome=success
Interface(s):
EWS, WS*
Syslog severity:
Informational
Explanation:
The EWS session timeout setting was modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value.
<old value> - Old setting value.