HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 71
<client computer IP address> - IP address of the client computer that sent the request to enable or
disable the “Allow firmware upgrades sent as print jobs (port 9100)” setting.
Message:
<device type>: Allow Installation of Legacy Packages with SHA-1 Changed; time="<timestamp>"
value=<value> old value=<old value> user="<user>" source_IP="<client computer IP address>"
outcome=success
Interface(s):
EWS, WS*
Syslog severity:
Informational
Explanation:
The “Allow installation of legacy packages signed with SHA-1 Hashing algorithm” setting was
either enabled or disabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value. Possible values are:
• enable
• disable
<old value> - Old setting value. Possible values are:
• enable
• disable
<user> - Authenticated user who enabled or disabled the “Allow installation of legacy packages
signed with SHA-1 Hashing algorithm” setting. If an unauthenticated user enabled or disabled the
“Allow firmware upgrades sent as print jobs (port 9100)” setting, the user key-value pair is not
contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to enable or
disable the “Allow installation of legacy packages signed with SHA-1 Hashing algorithm” setting.
Bootloader administrator password
Message:
<device type>: Boot Administrator Password modified; time="<timestamp>" source_IP="<client
computer IP address>" outcome=success
Interface(s):
WS*
Syslog severity:
Informational
Explanation:
The pre-boot menu administrator password was set, cleared, or modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<client computer IP address> - IP address of the client computer that sent the request to set, clear,
or modify the pre-boot menu administrator password.
Message:
<device type>: Boot Administrator Password modified; time="<timestamp>" source_IP="<client
computer IP address>" outcome=failure
Interface(s):
WS*
Syslog severity:
Warning
Explanation:
An attempt to set, clear, or modify the pre-boot menu administrator password was unsuccessful.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<client computer IP address> - IP address of the client computer that sent the request to set, clear,
or modify the pre-boot menu administrator password.