HP LaserJet Enterprise, HP PageWide Enterprise - HP Security Event Logging Messaging Reference (white paper)

Chapter 2 – Enhanced security event logging 74
<value> - New setting value.
<old value> - Old setting value.
<user> - Authenticated user who modified the LDAP server port setting. If an unauthenticated user
modified the LDAP server port, the user key-value pair is not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to modify
the LDAP server port.
Message:
<device type>: LDAP Sign In configuration modified; time="<timestamp>"
item=use_a_secure_connection_SSL value="<value>" old_value="<old value>" user="<user>"
source_IP="<client computer IP address>" outcome=success
Interface(s):
EWS, WS*
Syslog severity:
Informational
Explanation:
The “Use a secure connection (SSL)” setting for LDAP Sign In was either enabled or disabled.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value. Possible values are:
• enable
• disable
<old value> - Old setting value. Possible values are:
• enable
• disable
<user> - Authenticated user who enabled or disabled the “Use a secure connection (SSL)” setting.
If an unauthenticated user enabled or disabled the “Use a secure connection (SSL)” setting, the
user key-value pair is not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to enable or
disable “Use a secure connection (SSL)” setting.
Message:
<device type>: LDAP Sign In configuration modified; time="<timestamp>" item=bind_prefix
value="<value>" old_value="<old value>" user="<user>" source_IP="<client computer IP
address>" outcome=success
Interface(s):
EWS, WS*
Syslog severity:
Informational
Explanation:
The bind prefix setting for LDAP Sign In was set, cleared, or modified.
Variables:
<device type> - see Table 2-2.
<timestamp> - see Table 2-2.
<value> - New setting value.
<old value> - Old setting value.
<user> - Authenticated user who set, cleared, or modified the bind prefix setting. If an
unauthenticated user set, cleared, or modified the bind prefix setting, the user key-value pair is
not contained within the message.
<client computer IP address> - IP address of the client computer that sent the request to set, clear,
or modify the bind prefix setting.