HP LaserJet Enterprise M506 - Certificate of Volatility (x, xm models)

Hewlett-Packard Certificate of Volatility
Model:
HP LaserJet Enterprise
M506
Part Number:
M506x = F2A70A
M506zm = F2A67A
Address:
Hewlett Packard Company
11311 Chinden Blvd
Boise, ID 83714
Volatile Memory
Does the device contain volatile memory (Memory whose contents are lost when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (SRAM, DRAM, etc):
DRAM
Size:
512MB
User Modifiable:
Function:
Used for temporary storage
during the process of jobs, and
for applications that are
running on the OS.
Steps to clear memory:
When the printer is powered
off the memory is erased.
Yes No
Type (SRAM, DRAM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
.
Type (SRAM, DRAM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
Non-Volatile Memory
Does the device contain non-volatile memory (Memory whose contents are retained when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (Flash, EEPROM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
32KB
Yes No
Store customer setting data for
backup/restore
There are no steps to clear this
data.
Type (Flash, EEPROM, etc):
Size:
User Modifiable:
Function:
BIOS
Steps to clear memory:
4MB
Yes No
There are no steps to clear this
data.
Type (Flash, EEPROM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
Mass Storage
Does the device contain mass storage memory (Hard Disk Drive, Tape Backup)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (HDD, Tape, etc):
eMMC
Size:
8GB
User Modifiable:
Yes No
Function:
Stores data, OS, applications,
digitally signed firmware
images, persistent data, and
temporary data for processing
system functions
Steps to clear memory:
1. Power cycle the printer to
eras
e the customer data
partition cryptographically.
2. Instigate a non-secure fast
erase from the EWS.:
USB
Does the item accept USB input and if so, for what purpose (i.e. Print Jobs, device firmware updates, scan upload)?
Yes No If Yes please describe below
Walk up USB Print
Can any data other than scan upload be sent to the USB device)?
Yes No If Yes please describe below