HP LaserJet Enterprise M506 - User Guide

Load paper to Trays 2, 3, 4, and 5

Introduction

The following information describes how to load paper in Tray 2 and the optional 550-sheet trays (part number

F2A72A). These trays hold up to 550 sheets of 75 g/m

(20 lb) paper.

NOTE: The procedure to load paper for the 550-sheet trays is the same as for Tray 2. Only Tray 2 is shown

here.

CAUTION: Do not extend more than one paper tray at a time.

1. Open the tray.

NOTE: Do not open this tray while it is in use.

2. Before loading paper, adjust the paper-width

guides by squeezing the adjustment latches and

sliding the guides to the size of the paper being

used.

3. Adjust the paper-length guide by squeezing the

adjustment latch and sliding the guide to the size

of the paper being used.

11 LTR

14 LGL

20 Chapter 2 Paper trays ENWW