HP LaserJet Enterprise M506x Installation Guide

Set up HP ePrint via email

Use HP ePrint via email to print documents by sending them

as an email attachment to the printer’s email address from any

email enabled device, even from devices that are not on the

same network.

NOTE: The printer might require a rmware update to use this

feature.

To use HP ePrint via email, the printer must meet these

requirements:

• The printer must be connected to a wired or wireless network

and have Internet access.

• HP Web Services must be enabled on the printer, and

the printer must be registered with HP Connected or

HP ePrint Center.

Enable HP Web Services

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel,

touch the Network button to display the IP address or

host name.

b. Open a Web browser, and in the address line, type the

IP address or host name exactly as it displays on the

printer control panel. Press the Enter key on the computer

keyboard. The EWS opens.

NOTE: If the Web browser displays a There is a problem

with this website’s security certicate message when

attempting to open the EWS, click Continue to this website

(not recommended). Choosing Continue to this website (not

recommended) will not harm the computer while navigating

within the EWS for the HP printer.

2. Click the HP Web Services tab.

3. Select the option to enable Web Services.

NOTE: Enabling Web Services might take several minutes.

4. Go to www.hpconnected.com or www.hp.com/go/eprintcenter

to create an HP ePrint account and complete the setup process.