HP LaserJet Enterprise MFP M527 and M506 - Formatter Install Guide











26 27

Insert the fax PCA cradle mounting tab and fax port in the slots

in the sheet-metal plate (callout 1), and then rotate the connec-

tor end of the fax PCA toward the formatter (callout 2).

Engage the retainer with the slot in the formatter.

TIP: Pinch the retainer to easily engage it with the slot.

Connect three connectors (callout 1).

IMPORTANT: Make sure that all formatter connectors are con-

nected and fully seated.

Make sure that the locking connector (callout 1) latches and

that the standoff (callout 2) engages with the slot in the

formatter (it might be necessary to pinch the retainer to engage

it with the slot).

NOTE: M527 fax models only. For all other models, skip this step

and go to Step 27.

Before proceeding, take note of the location of the slots (callout

1) in the sheet-metal where the fax PCA cradle mounting tab

and fax port (callout 2) must be installed.