Maintenance and Service Guide HP ProDesk 400 G1 Microtower HP ProDesk 480 G1 Microtower HP ProDesk 490 G1 Microtower HP ProDesk 400 G1 Small Form Factor

4. Slide the drive into the drive bay (1) and install the four 6-32 mounting screws (2) to secure the
drive in place.
NOTE: HP has supplied four extra 6-32 mounting screws on the front of the chassis behind the
bezel. Refer to
Drives on page 59 for an illustration of the extra mounting screws location. When
replacing a hard drive, use the four 6-32 mounting screws that were removed from the old drive to
install the new one.
72 Chapter 5 Removal and replacement procedures: Microtower