Maintenance and Service Guide HP ProDesk 400 G1 Microtower HP ProDesk 480 G1 Microtower HP ProDesk 490 G1 Microtower HP ProDesk 400 G1 Small Form Factor

DisplayPort connector module (480 MT and 490 MT
models only)
Description Spare part number
DisplayPort connector module (for use only in 490 MT models) 735966-001
1. Prepare the computer for disassembly (Preparation for disassembly on page 42).
2. Remove the access panel (
Access panel on page 43).
3. Remove the front bezel (
Front bezel on page 44).
4. From the outside, rear of the computer, remove the Torx T15 screw that secures the DisplayPort
module to the computer.
74 Chapter 5 Removal and replacement procedures: Microtower