HP EliteDesk 800 G1 Desktop Mini HP ProDesk 600 G1 Desktop Mini Maintenance & Service Guide

Management
Operations
AMT (enable/disable). Allows you to enable or disable functions of the embedded Management
Engine (ME) such as Active Management Technology (AMT). If set to disable, the Management
Engine is set to a temporarily disabled state and will not provide functions beyond necessary system
configuration. Default is enabled.
Unconfigure AMT/ME (enable/disable). Allows you to unconfigure any provisioned management
settings for AMT. The AMT settings are restored to factory defaults. This feature should be used with
caution as AMT will not be able to provide any set AMT management functions once unconfigured.
Default is disabled.
Hide Unconfigure ME Confirmation Prompt (enable/disable). Allows you to set the system to not
display the confirmation to unconfigure ME.
Watchdog Timer (enable/disable). Allows you to set amount of time for a operating system and
BIOS watchdog alert to be sent if the timers are not deactivated. BIOS watchdog is deactivated by
BIOS and would indicate that a halt occurred during execution if the alert is sent to the
management console. An operating system alert is deactivated by the operating system image and
would indicate that a hang occurred during its initialization. Default is enabled.
Option ROM Launch
Policy
(Windows 8 only). Windows 8 installs as a UEFI operating system (as opposed to ‘legacy’), and
ships with the ‘Legacy Support’ setting off in the BIOS. When ‘Legacy Support’ is off, the Option
ROM Launch Policies are set to ‘UEFI Only’. These policies control whether the Legacy Option ROM
or the UEFI driver is loaded for the following features:
●
PXE Option ROMs (UEFI Only/Do Not Launch). Specifies whether the legacy option ROM or
the UEFI driver in the BIOS is used to provide PXE services.
●
Storage Option ROMs (UEFI Only/Do Not Launch). Specifies whether the legacy option ROM
or the UEFI driver in the BIOS is used to provide RAID setup and support.
●
Video Option ROMs (UEFI Only/Do Not Launch). Specifies whether the legacy VBIOS or the
UEFI driver in the BIOS is used to provide graphics setup and support.
Connected BIOS Connected BIOS (enable/disable) - Lets you configure a proxy server from which to get updates to
the BIOS. If set to enabled, the Use Proxy option displays.
Use Proxy (enable/disable) - Lets you enter a proxy server address. If set to enabled, the Proxy
Address field displays.
76 Chapter 6 Computer Setup (F10) Utility