HP Slate8 Pro Maintenance and Service Guide

4.
Detach the WLAN main antenna transceiver (3) from the display panel assembly. (The WLAN
main antenna transceiver is attached to the display panel assembly with double-sided adhesive.)
5. Remove the WLAN main antenna transceiver and cable.
NOTE: Steps 6 through 9 contain WLAN auxilliary antenna removal information. See steps 2
through 5 for WLAN main antenna removal information.
6. Disconnect the WLAN auxilliary antenna cable (1) from the auxilliary terminal on the
system board.
7. Release the WLAN auxilliary antenna cable from the routing clips (2) and channel built into the
display panel assembly.
24 Chapter 5 Removal and replacement procedures