Instruction Manual

13
2.5 Initial Settings
Before using the camcorder, we recommend you to enable the Automatic Record
function and set up the correct date and time.
2.5.1 Set Automatic Recording
To enable the recording to start automatically after you turn on the
power, do the following:
1. Press the button to enter the OSD
menu.
2. Press the / button to select
Automatic Record and press the
button.
3. Press the / button to select On and press the button.
4. Press the button to exit the menu.
2.5.2 Set the Date and Time
To set the correct date and time, do the following:
1. Press the button to enter the OSD
menu.
2. Press the / button to select Date
/ Time and press the button.
3. Press the / button to adjust the
value and press the button to
move to another field.
4. Repeat step 3 until the date and time setting is complete.
Note:
When the battery is depleted, you must reset the date/time before the function -automatic record is
started. If the user doesn't reset the date/time, the camcorder will give you an alert after one minute
and the automatic record will be started .