Instruction Manual

15
3.1.3 Emergency Recording
During normal video recording, press the
button to begin emergency recording
mode.
The “Emergency” message will be
displayed immediately on the upper left
corner of the screen, and the recorded file
will be contiuous and protected from being
overwritten.
To stop the recording, press the button.
Note:
1. If the Collision Detection function is enabled and a collision is detected, the camcorder will
automatically trigger the emergency recording feature.
2. The emergency recording file is created as a new file, which will be protected to avoid being
overwritten by normal loop recording. A 4 GB memory card can save up to 5 emergency video files,
and 8 GB (or above) memory card can save up to 10 emergency video files. The alert message of
“Emergency files are full” will pop up on the screen when the emergency recording files are full,
and the oldest emergency file will be automatically deleted when a new emergency recording file is
created.