Instruction Manual

18
3 Using the Car Recorder
3.1 Recording Videos
3.1.1 Record videos while driving
When the vehicle engine starts up and the Automatic Record function is
enabled, the device automatically turns on and starts recording.
The touch panel function is not ready yet within 2 seconds upon the auto
recording start .
Recording will automatically stop when the engine is switched off, or
touch to stop recording manually.
Note:
On some cars, the recording will continue when the engine is switched off. If this
happens, please manually turn off the cigarette lighter or remove the car adapter
from the cigarette lighter.
3.1.2 LDWS (Lane Departure Warning Systems)
When LDWS is enabled after satellite positioning, camcoder will give a
voice alert and display an alarm screen if vehicle speed reaches or
exceeds 50 km/h (31 mile/h) and the vehicle deviates from the original
lane.
To set the LDWS (Lane Departure
Warning Systems), do the following:
1. Ensure the camcorder is
connected to the power adapter
and is receiving power.
2. Touch
to enter Main
Menu.
3. Touch to switchover to
Driving Safety Main Menu.