Instruction Manual

21
3.1.4 Motion Detection
If Motion Detection is activated, when the camcorder is powered on, a
message “Wait for 10 seconds to enter Motion Detection or touch the
screen to power off” will be displayed on the screen. This means the
system will enter Motion Detection automatically in 10 seconds; when
the camcorder detects any motion in front of lens, Video Record will be
activated for a duration the same as the length setting.
To set the motion detection, do the following:
1. Touch to enter main menu.
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select for
entering Motion Detection menu,
touch again to activate (on).
4. Touch to return to record
screen.
Note:
1. When the battery is fully charged and is in good condition, Motion Detection can
record continuously for about 30 minutes.
2. As the device is used, the battery storage capacity will decrease gradually. This is a
normal phenomenon for the battery.