User Guide

Print photos
Make sure photo paper is loaded into the photo tray.
To print photos from a memory device
1. Insert a memory device into the slot.
CAUTION: Do not remove the ash drive from the printer USB port while it is being accessed by the
printer. This can damage the les on the USB ash drive. You can safely remove a USB ash drive only
when the USB port light is not blinking.
2. On the printer display, select a photo that you want to print and touch Continue.
3. Specify the number of photos to print.
4.
Touch (Edit) to change brightness, crop, or rotate the selected photo, or touch (Print Settings) to
use such features as
Red Eye Removal or Photo Fix.
5. Touch Continue and preview the selected photo.
6. Touch Print to begin printing.
To print a photo from the printer software
1. From your software, select Print.
2. Make sure your printer is selected.
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
●
On the Layout tab, select Portrait or Landscape orientation.
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the
Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
●
Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5. Click OK to return to the Properties dialog box.
6. Click OK, and then click Print or OK in the Print dialog box.
NOTE: After the printing is nished, remove unused photo paper from the photo tray. Store the photo paper
so it does not start to curl, which could reduce the quality of your printout.
20 Chapter 3 Print ENWW