User Guide

Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
●
When setting up the wireless networked printer, make sure your wireless router is powered on. The
printer searches for wireless routers, then lists the detected network names on the display.
NOTE: If your printer has not been setup with a wireless connection, touch (Wireless) and then
touch
(Settings) on the printer display to start the Wireless Setup Wizard.
●
To check the wireless connection on the printer, touch the (Wireless) on the control panel to open the
Wireless Summary menu. If it shows Wireless O or Not Connected, touch (Settings) and then touch
Wireless Setup Wizard. Follow the on-screen instructions to set up your printer wireless connection.
●
If your computer is connected to a Virtual Private Network (VPN), you need to disconnect from the VPN
before you can access any other device on your network, including the printer.
●
Learn more about conguring your network and the printer for wireless printing. Click here to go online
for more information.
●
Learn how to nd your network security settings. Click here to go online for more information.
●
Learn about the Print and Scan Doctor (Windows only) and other troubleshooting tips. Click here to go
online for more information.
●
Learn how to change from a USB to wireless connection. Click here to go online for more information.
●
Learn how to work with your rewall and anti-virus programs during printer setup. Click here to go
online for more information.
ENWW Tips for setting up and using a networked printer 91