User's Manual
Table Of Contents
- Table of Contents
- Setting Up Your HP Firebird
- Turning On Your HP Firebird for the First Time
- Finding More Information
- Turning On the HP Firebird
- Turning Off the HP Firebird
- Restarting the HP Firebird
- Using Lock
- Using Sleep Mode
- Connecting to the Internet
- Using the HP Firebird with Safety and Comfort
- Setting Up User Accounts
- Protecting the HP Firebird
- Guidelines for Installing Software and Hardware Devices
- Transferring Files and Settings from an Old Computer to Your HP Firebird
- Using the Norton Internet Security Antivirus Software
- Using DVD Media Drives
- Caring for Your HP Firebird
- Maintenance
- Troubleshooting Computer Problems
- Updating Drivers
- System Recovery
- Index
40 HP Firebird Desktop Essentials (Features may vary by model)
Sound is only coming out
of two speakers.
Ensure that all speakers are connected into the correct audio
connectors. If they are, use either your sound card software or the
Windows Audio Controller (located in the Control Panel) to set your
speakers to the appropriate settings: 2.1, 4, 4.1, 5.1, or 7.1.
Codec error messages
appear when certain
audio files are played.
Open the file in Windows Media Player. Ensure that Windows
Media Player is configured to automatically download codecs.
If the correct codec is available, the file will play. Note that
you must be connected to the Internet to download codec files.
If the correct codec is not available, check whether an update
is available for Windows Media Player.
For more information, open Windows Media Player Help and
search for codec.
Volume is very low or
unsatisfactory.
Detached non-powered speakers (speakers without a separate
power cord) do not produce satisfactory sound. Replace the
non-powered speakers with powered speakers. Powered speakers
have a power cord and On button, and they connect to the Audio
Out connector on the back of the computer.
Audio (continued)
Symptom Possible solution
-1