HP Workstations - Serial Attached SCSI Rear Panel Cable Installation

2. To install the MiniSAS-4x connector:
a. Attach the MiniSAS-4x connector of the SAS rear panel cable assembly to the SAS mounting
bracket
.
b. Install the SAS mounting bracket in the workstation in place of the expansion slot cover
2
.
c. Connect the SAS cables to the SAS connectors on the system board
, or to an approved,
compatible plug-in card.
Figure 4 Attaching the SAS rear panel cable assembly to the workstation
3. Adhere the external SAS label to the outside of the SAS mounting bracket.
Figure 5 Adhering the label to the SAS mounting bracket
ENWW Step 2—Installing the SAS rear panel cable 5