HP Z Workstations - HP Optical Bay Hard Drive Bracket Installation

d. Lower the drive into the rails
2
.
e. Align the four pins on the rails with the holes in the hard drive, and then snap the rails into
place
.
Figure 3 Installing the drive in the rails
4. To install the hard drive in the drive bracket, gently squeeze the green tabs while sliding the drive
with rails into the bracket
2
.
Figure 4 Installing the drive in the ODD bracket
5. Install the bracket in the workstation.
a. Disengage the optical bay release latch
while inserting the bracket into the optical bay
2
.
ENWW Step 2—Installing the hard disk drive 5