HP Z400 and Z800 Workstations - NVIDIA Tesla Compute Processor card installation

Step 1—Preparing for component installation
NOTE: Computer models vary. All illustrations are examples only.
Accessing the internal components of the computer
1.
If you need help preparing the computer for this installation, consult the removal and replacement
procedures in the service guide for your computer at
http://www.hp.com/support/manuals.
2.
Power down the computer, and then disconnect the power cord.
3.
Power down all external devices, and then disconnect them from the computer.
4.
Remove the side access panel.
Removing components
1.
Remove the expansion card support to enable access to the expansion slots and system board
connectors.
2.
Select a PCI Express (PCIe)2-x16 expansion slot.
NOTE: To identify a PCIe2-x16 expansion slot, see the service label on the workstation side
access panel.
NOTE: For optimal cooling, keep the expansion slot adjacent to the fan free or filled with an
expansion card that does not obstruct the fan inlet of the Tesla card.
a.
Open the expansion slot retention clamp (1).
b.
Remove the applicable expansion slot covers (2).
ENWW
Step 1—Preparing for component installation
3