User's Manual

SATA 6 Gb/s 256 GB * , 2.5-
inch SATA SED Solid State
Drive (Expected to be
available in November
2013)
Drive Weight 73 Grams
Capacity 256 GB
Height 0.276 in (7 mm)
Width 2.76 in (70 mm)
Interface SATA 3 (6 Gb/s)
Performance Maximum Sequential Read Maximum Sequential Write
Up to 460 MB/s Up to 260 MB/s
Logical Blocks 500,118,192
Operating Temperature 32° to 158°F (0° to 70°C) [case temp]
Features ATA Security; ATA-8 compliant; SATA 3.0; DIPM; TRIM
SATA 6Gb/s 120 GB * , 2242
M.2 Solid State Drive
(Expected to be available in
November 2013)
Drive Weight Up to 10 Grams
Capacity 120 GB
Height 0.138 in (3.5mm)
Width 0.866 in (22 mm)
Interface M.2 SATA Gen3 (6 Gb/s)
Performance Maximum Sequential Read Maximum Sequential Write
Up to 540 MB/s Up to 520 MB/s
Logical Blocks 234,441,648
Operating Temperature 32° to 158°F (0° to 70°C) [case temp]
Features ATA Security; ATA-8, SATA 3.0; DIPM; TRIM
* For hard drives and solid state drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 16 GB (for
Windows 7) and 36 GB (for Windows 8) of system disk is reserved for the system recovery software.
** * FIPS-certified, hardware-based AES-256 encryption image.
SECURITY
HP Fingerprint Reader
(optional)
Mobile Voltage Operation 3.0V-3.6V
Operating Temperature 14° - 167°F (-10° - 75°C)
Current Consumption
Image
36 mA peak
Low Latency Wait for
Finger
950 uA
Capture Rate 3000. lines/sec
ESD Resistance IEC 61000-4-2 4B (±15KV)
Detection Matrix 200*1 (plus another secondary line)
508 dpi
12*3 mm sensor area
QuickSpecs
HP EliteBook 820 G1 Notebook PC
HP EliteBook 840 G1 Notebook PC
HP EliteBook 850 G1 Notebook PC
Technical Specifications
DA - 14687 Worldwide — Version 1 — October 1, 2013 Page 33