Getting Started Guide

Learning
If face logon is unsuccessful but you enter your password successfully, you may be prompted to save
a series of images to increase the chances of successful face logon in the future.
Deleting a scene
To delete a currently enrolled scene:
1. Open the Security Manager User Console. For more information, see
Opening Security Manager
on page 23.
2. Under My Logons, click Credential Manager, and then click Face.
3. Click the scene to be deleted, and then click the Trash can icon.
4. Click OK on the confirmation dialog.
Advanced User Settings
1. Open the Security Manager User Console. For more information, see
Opening Security Manager
on page 23.
2. Under My Logons, click Credential Manager, and then click Face.
3. Click Advanced to configure the following options:
Other Settings tab—Select the check box to enable one or more of the following options, or
clear the check box to disable an option. These settings apply only to the current user.
●
Play sound on face recognition events—Plays a sound when face logon succeeds or
fails.
●
Prompt to update scenes when logon fails—If face logon is unsuccessful but you enter
your password successfully, you may be prompted to save a series of captured images to
increase the chances of successful face logon in the future.
● Prompt to enroll a new scene when logon fails—If face logon is unsuccessful but you
enter your password successfully, you may be prompted to enroll a new scene to increase
the chances of successful face logon in the future.
4. To return the settings to the original values, click Restore Defaults.
5. Click OK.
Setting up a smart card
If a smart card reader is built in or connected to your computer and if the administrator has enabled a
smart card as an authentication credential and performed the steps described in the HP ProtectTools
Administrative Console software Help, the HP ProtectTools Security Manager Setup Wizard prompts
you to insert and set up a smart card. You can also set up your smart card on the Smart Card page
under Credential Manager in the Security Manager User Console.
NOTE: An administrator must initialize the smart card before it can be used.
Initializing the smart card
HP ProtectTools Security Manager can support a number of different smart cards. The number and
type of characters used as PIN numbers may vary. The manufacturer of the smart card should
provide tools to install a security certificate and PIN management that HP ProtectTools will use in its
security algorithm.
My Logons 33