HP ProBook 640 G1, 645 G1, 650 G1, and 655 G1 Notebook PCs - Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Customer Self-Repair parts
- Removal and replacement procedures for Authorized Service Provider parts
- Computer Setup (BIOS), TPM, and HP Sure Start – Windows 10
- Using HP PC Hardware Diagnostics (UEFI) – Windows 10
- Computer Setup
- Windows 8 — Computer Setup (BIOS), MultiBoot, and System Diagnostics
- Windows 7 — Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI)
- Specifications
- Backup and recovery – Windows 10
- Backup and recovery
- Statement of Volatility
- Power cord set requirements
- Recycling
- Index
Optical drive
NOTE: The optical drive spare part kit includes a bezel and bracket.
Description Spare part number
Blu-ray R/RE DVD±RW SuperMulti Double-Layer Combo Drive 749959-001
739999-001
744820-001
DVD±RW SuperMulti Double-Layer Drive 749958-001
744822-001
740001-001
DVD-ROM Drive 749957-001
744821-001
740000-001
735601-001
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see Battery on page 56).
5. Remove the service cover (see Service cover on page 57).
Remove the optical drive:
1. Position the computer with the left side toward you.
2. Loosen the captive screw (1) that secures the optical drive to the computer.
3. Insert a thin tool into the optical drive tab access (2), and then press the tab to the left to release the
optical drive from the computer.
Component replacement procedures 69