Other Content

 Click Apply, and then wait until the changes are confirmed.
Add a new printer using JetDirect protocol (HP LaserJet and network connection only)
If the printer is offline and your printer is already connected to your network, connect to the printer
using an IP address.
1. From the Printers and scanners list, click the plus button to add a printer.
2. Click the IP tab.
3. Enter the printer’s IP address into the Address field. You can find the printer’s IP address by
printing out a network configuration page from the printer.
4. Next to protocol, select HP Jetdirect – Socket.
5. If desired, you can change the name in the name field from the IP address to a name that you can
better understand.
6. Look at the Use field:
 If the Use field is already filled out with the name of your printer, then your printer has
been detected and is likely online again.
 If the Use field is filled out with a Generic Postscript printer, your printer may or may not
be recognized over the network.
7. Click Add to add the printer.
Figure : Example of Adding the printer