HP LaserJet Pro M130, M132, HP LaserJet Ultra M134 - Certificate of Volatility (a models)

Hewlett-Packard Certificate of Volatility
Model:
HP LaserJet Pro M130/M132
Multifunction Printer Series
HP LaserJet Ultra M134
Multifunction Printer Series
Part Number:
G3Q57A = M130a
G3Q61A = M132a
G3Q66A = M134a
Address:
Hewlett Packard Company
11311 Chinden Blvd
Boise, ID 83714
Volatile Memory
Does the device contain volatile memory (Memory whose contents are lost when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (SRAM, DRAM, etc):
DDR3-DRAM
Size:
128MB
User Modifiable:
Function: Used for temporary
storage during the processing
of jobs and for applications
running on the OS.
Steps to clear memory:
When the printer is powered
OFF , the memory is erased.
Yes No
Type (SRAM, DRAM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
Type (SRAM, DRAM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
Non-Volatile Memory
Does the device contain non-volatile memory (Memory whose contents are retained when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (Flash, EEPROM, etc):
EEPROM
Size:
User Modifiable:
Function:
Steps to clear memory:
16KB
Yes No
Store customer setting data for
backup/restore
Perform NVRAM initialization
according to service manual, it
returns most system parameter
in NVRAM to default factory
setting.
Type (Flash, EEPROM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Nor-Flash
16MB
Yes No
Store firmware code, File
system, customer setting data
for backup/restore
Permanent storage requires
special code to clear or update
firmware- Typically not done by
the user
Type (Flash, EEPROM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
Mass Storage
Does the device contain mass storage memory (Hard Disk Drive, Tape Backup)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (HDD, Tape, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
Type (HDD, Tape, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
USB
Does the item accept USB input and if so, for what purpose (i.e Print Jobs, device firmware updates, scan upload)?
Yes No If Yes please describe below
The front USB host can accept print jobs, scan uploads, photos and can be used to upload printer firmware.
Can any data other than scan upload be sent to the USB device)?
Yes No If Yes please describe below
Rear USB host when configured will accept stored jobs, encrypted files stored and deleted by user.