HP Z230 Workstation - Maintenance and Service Guide

Configuring RAID with the Intel utility
Follow these steps to create RAID volumes.
1. Press ctrl+i, when prompted, to enter the Intel Rapid Storage Technology utility (RST). Use the arrow
keys and the space bar to navigate and select options.
NOTE: If only one hard drive is attached, the utility does not open.
2. Select Create RAID Volume,and then press enter.
3. Type the a name for the RAID volume in the Name field, and then press tab.
4. Select a level in the RAID Level field, and then press tab.
5. If three or more hard drives are installed, complete the following steps:
a. Press enter to display the Select dialog box.
b. Select individual physical members of the volume.
c. Press enter to exit the Select dialog box and to return to the Create Volume Menu dialog box.
6. If appropriate, select a size in the Stripe Size field, and then press tab.
7. Enter the desired volume size in the Capacity field, and then press tab.
8. Press enter to initiate volume creation.
9. When the warning message appears, press Y to create the volume.
10. Select 6 > Exit, then press enter.
11. Press Y to confirm the exit.
Configuring Intel SATA RAID 111