User's Manual
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Using Setup Utility (BIOS) and System Diagnostics (Windows 8)
- Specifications
- Backing up, restoring, and recovering (Windows 8)
- Power cord set requirements
- Recycling
- Index
5.
Remove the 15 Phillips M2.5 x 7.0 screws that secure the top cover to the computer.
6. Turn the computer right-side up, with the front toward you.
7. Open the computer.
8.
Lift the left edge of the top cover (1) until the left side disengages from the base enclosure.
9. Remove the top cover (2) at an angle.
Reverse this procedure to install the top cover.
ENWW
Component replacement procedures
53