User's Manual
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Using Setup Utility (BIOS) and System Diagnostics (Windows 8)
- Specifications
- Backing up, restoring, and recovering (Windows 8)
- Power cord set requirements
- Recycling
- Index
2.
Release the wireless antenna cables (2) from the clips and the opening in the base enclosure.
NOTE: It may be necessary to release the USB board ZIF cable to remove the wireless antenna
cables.
CAUTION: Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display and other computer components.
3.
Remove the four Phillips M2.5 × 6.5 screws (1) that secure the display assembly to the computer.
4. Remove the display assembly by lifting straight up (2).
ENWW
Component replacement procedures
61