User's Manual
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Using Setup Utility (BIOS) and System Diagnostics (Windows 8)
- Specifications
- Backing up, restoring, and recovering (Windows 8)
- Power cord set requirements
- Recycling
- Index
b.
Disconnect the webcam/microphone cable (2) from the webcam/microphone module.
c. Remove the webcam/microphone module.
7. If it is necessary to replace the hinge covers:
a. The hinge covers are held in place by the same screws as the previously removed bezel.
b.
Using a small tool to pry, remove the hinge covers.
ENWW
Component replacement procedures
63