User's Manual
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Using Setup Utility (BIOS) and System Diagnostics (Windows 8)
- Specifications
- Backing up, restoring, and recovering (Windows 8)
- Power cord set requirements
- Recycling
- Index
8.
If it is necessary to replace the display panel:
a. Remove the four bottom Phillips M2.5 × 3.5 screws and the two top Phillips M2.5 × 2.5
screws that secure the display panel to the display enclosure.
b. Lift the top edge of the display enclosure, (1) and then swing it up and forward until it is
perpendicular to the display panel.
64 Chapter 4 Removal and replacement procedures ENWW