External Media Cards User Guide
© Copyright 2006 Hewlett-Packard Development Company, L.P. SD Logo is a trademark of its proprietor. Java is a U.S. trademark of Sun Microsystems, Inc. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Table of contents 1 Digital Media Slot cards Inserting a digital card .......................................................................................................................... 2 Stopping or removing a digital card ...................................................................................................... 3 2 PC Cards Configuring a PC Card .........................................................................................................................
iv ENWW
1 Digital Media Slot cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital-media-equipped cameras and PDAs as well as with other computers. The Digital Media Slot supports Secure Digital (SD) Memory Card formats. CAUTION To avoid damaging the digital card or the computer, do not insert any type of adapter into the Digital Media Slot.
Inserting a digital card CAUTION To prevent damage to the digital card connectors, use minimal force to insert a digital card. To insert a digital card: 1. Hold the digital card label-side up, with the connectors facing the computer. 2. Gently slide the card into the Digital Media Slot until the card is seated. The operating system will issue a sound to indicate that a device has been detected.
Stopping or removing a digital card CAUTION To prevent loss of data or an unresponsive system, stop the digital card before removing it. To stop or remove a digital card: 1. Close all files and applications that are associated with the digital card. NOTE To stop a data transfer, click Cancel in the operating system Copying window. 2. To stop the digital card: a. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar.
4 Chapter 1 Digital Media Slot cards ENWW
2 ENWW PC Cards 5
Configuring a PC Card A PC Card is a credit card-sized accessory designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). The PC Card slot supports ● 32-bit (CardBus) and 16-bit PC Cards. ● Type I and Type II PC Cards. NOTE Zoomed video PC Cardsand 12–V PC Cards are not supported. CAUTION To prevent loss of support for other PC Cards, install only the software required for the device.
Inserting a PC Card CAUTION To prevent damage to the computer and external media cards, do not insert an ExpressCard into a PC Card slot. CAUTION To prevent damage to the connectors: Use minimal force to insert a PC Card. Do not move or transport the computer when a PC Card is in use. The PC Card slot may contain a protective insert. The insert must be released and then removed before you can insert a PC Card. 1. To release and remove the PC Card slot insert: a. Press the PC Card eject button (1).
b. Gently slide the card into the PC Card slot until the card is seated. The operating system will issue a sound to indicate that a device has been detected. NOTE The first time you insert a PC Card, the "Found New Hardware" message is displayed in the notification area, at the far right of the taskbar.
Stopping or removing a PC Card CAUTION To prevent loss of data or an unresponsive system, stop a PC Card before removing it. NOTE An inserted PC Card uses power even when idle. To conserve power, stop or remove a PC Card when it is not in use. To stop or remove a PC Card: 1. Close all applications and complete all activities that are associated with the PC Card. NOTE To stop a data transfer, click Cancel in the operating system Copying window. 2. To stop the PC Card: a.
c. 10 Pull the card (2) out of the slot.
3 Smart cards NOTE The term smart card is used throughout this chapter to refer to both smart cards and Java™ Cards. A smart card is a credit card–sized accessory that carries a microchip containing memory and a microprocessor. Like personal computers, smart cards have an operating system to manage input and output, and they include security features to protect against tampering. Industry-standard smart cards are used with the smart card reader.
Inserting a smart card To insert a smart card: 12 1. Holding the smart card label-side up, gently slide the card into the smart card reader until the card is seated. 2. Follow the on-screen instructions for logging on to the computer using the smart card PIN.
Removing a smart card To remove a smart card: ▲ ENWW Grasp the edge of the smart card, and pull it out of the smart card reader.
14 Chapter 3 Smart cards ENWW
Index Symbols/Numerics 16–bit PC Cards 6 32–bit PC Cards 6 C CardBus PC Cards 6 configuring PC Cards 6 smart card defined 11 inserting 12 removing 13 software 6 Z zoomed video PC Cards 6 D digital cards inserting 2 removing 3 stopping 3 supported types 1 drivers 6 E external media cards.
16 Index ENWW
