HP Compaq dx2300 and dx2308 Business PC Service Reference Guide, 1st Edition

Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-3 Computer Setup—Main
Option Description
Date (mm:dd:yy)
Allows you to set system date.
Time (hh:mm:ss)
Allows you to set system time.
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 4
For each, allows you to:
run HDD self-test for selected channel:
SMART Status Check
HDD Short Self-Test
HDD Extended Self-Test
auto-detect HDD size and head
set extended IDE drive on selected channel to:
None
Auto
set access mode on selected channel to:
Large
Auto
view:
Firmware
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Onboard FDC
Controller
Disables/enables the floppy disk controller.
Drive A
Allows you to set Drive A to:
None
1.44M, 3.5 in.
Halt On
Allows you to set POST error behavior to:
All Errors
No Errors
6Chapter 2 Computer Setup (F10) Utility ENWW