HP Compaq dx2300 and dx2308 Business PC Service Reference Guide, 1st Edition

Computer Setup—PC Health
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-6 Computer Setup—PC Health
Option Description
System Fan Fail
Check
Disables/enables system fan detection during POST.
Smart Fan Function
Disables/enables smart fan functionality.
Current CPU
Temperature
(view only)
Current System
Temperature
(view only)
Current CPU Fan
Speed
(view only)
Current System Fan
Speed
(view only)
Vcore
(view only)
12V
(view only)
5V
(view only)
VCC (V)
(view only)
VBAT (V)
(view only)
5VSB (V)
(view only)
Computer Setup—Actions
Table 2-7 Computer Setup—Actions
Option Description
Save and Exit Setup
Allows you to save current settings and exit Computer Setup.
Exit Without Saving
Allows you to exit Computer Setup without saving changes..
Load Optimized Defaults
Allows you to reset Computer Setup to factory defaults.
Recovering the Configuration Settings
Recovering the configuration settings established in the Computer Setup (F10) Utility requires that you first
back up the settings before a recovery is needed.
The CMOS Save/Load utility can be found at
http://www.hp.com under the Software & Driver
Downloads for your specific model. Download the firmware files into a folder on a removable storage
device. It is recommended that you save any modified computer configuration settings to a diskette, a USB
flash media device, or a diskette-like device (a storage device set to emulate a diskette drive) and save
the diskette or device for possible future use.
10 Chapter 2 Computer Setup (F10) Utility ENWW