Manualshelf

HP Compaq dx2300 and dx2308 Business PC Service Reference Guide, 1st Edition

ManualsBrandsHP ManualsPcs/WorkstationsCompaq dx2300 Microtower PC
41424344454647484950
Access Panel
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 37).
CAUTION: Before removing the computer access panel, ensure that the computer is turned
off and that the power cord is disconnected from the electrical outlet.
2.
Disconnect the power cord from the computer and from the power source (1).
3.
Remove the two screws that secure the access panel to the computer chassis (2).
4.
Slide the access panel back about 6 mm (1/4 inch), then rotate the top of the panel away from the
chassis (pivot on the bottom) and lift it off the unit (3).
Figure 7-1 Removing the Access Panel
To replace the access panel, reverse the removal steps.
38 Chapter 7 Removal and Replacement Procedures— Microtower (MT) Chassis ENWW