HP Compaq dx2300 and dx2308 Business PC Service Reference Guide, 1st Edition

Power Switch Assembly
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 37).
2.
Remove the access panel and rotate the computer so the system board is parallel to the table to make
it easier to work on (
Access Panel on page 38)
3.
Disconnect the braided cables from the system board.
4.
Free the braided cables from the cable tie that is attached to the chassis.
5.
Squeeze the top of the switch holder (1), rotate the switch, and remove it from the chassis.
To install the power switch assembly, reverse the removal procedures.
ENWW Power Switch Assembly 55