HP Compaq dx2300 and dx2308 Business PC Service Reference Guide, 1st Edition

Type 1 Battery Holder
1.
Lift the battery out of its holder.
2.
Slide the replacement battery into position, positive side up.
3.
The battery holder automatically secures the battery in the proper position.
4.
Replace the computer access panel.
5.
Plug in the computer and turn on power to the computer.
6.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to the Computer Setup (F10) Utility Guide.
64 Chapter 7 Removal and Replacement Procedures— Microtower (MT) Chassis ENWW