Quick Setup and Getting Started Guide (Enhanced for Accessibility)

Step 3: Connect External Devices

Connect the monitor, mouse, keyboard, and network cables.

NOTE: Arrangement and number of connectors may vary by

model.

1 Power Cord Connector 7 Parallel Connector

2 Voltage Select Switch 8 Monitor Connector

3 PS/2 Mouse Connector (green) 9 Microphone Connector (pink)

4 PS/2 Keyboard Connector

(purple)

10 Line-Out Connector for

powered audio devices (green)

5 Universal Serial Bus (USB) 11 Line-In Audio Connector (blue)

Serial Connector 12 RJ-45 Network Connector

NOTE: If a PCI graphics card is installed, the connectors on the card and the

system board may be used at the same time. Some settings may need to be

changed in Computer Setup to use both connectors. For information about Boot

Order, refer to the Computer Setup (F10) Utility Guide on the Documentation and

Diagnostics CD.

CAUTION: Do not add optional hardware or third-party devices to

the computer until the operating system is successfully installed.

Doing so may cause errors and may prevent the operating system

from installing properly.

ENWW

Step 3: Connect External Devices