Programming Reference Guide

1D Symbologies Enter/Exit Programming Mode

111

Industrial 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for Industrial 2 of 5 Length Control. Length

2 is the maximum label length if in Variable Length Mode, or the second fixed length if in

Fixed Length Mode. Length includes the barcode

’s check, data, and full-ASCII shift

characters. The length does not inc

lude start/stop characters.

The length can be set from 1 to 50 characters. A setting of 0

specifies to ignore this length

(only one fixed length).

Table 12 provides examples for setting Length

2. See page 188 for detailed instructions on

setting this feature.

Table 12. Industrial 2 of 5 Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

00 (Ignore This

ngth)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Industrial 2 of5 Length 2 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can

then start again at the beginning.

CANCEL

$CU2L2

DEFAULT

50 = Length 2 is 50 Characters