Programming Reference Guide

Enter/Exit Programming Mode 2D Symbologies
164 HP Retail Integrated Barcode Scanner
PDF417 Set Length 2
This feature specifies one of the barcode lengths for PDF417 Length Control. Length 2 is the
maximum label length if in Variable Length Mod
e, or the second fixed length if in Fixed
Length Mode. Length includes the barcode’s check, data, and full-ASCII shift characters.
The length does not include start/stop characters. Characters can be set from 01 to 2,710
characters (pad with zeroes) in increments of 01. Any value greater than 2,710 will be
considered to be 2,710.
See page 188 for detailed instructions on setting this feature.
Select PDF417 Length 2 Setting
To configure this feature, s
can the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
l
eft followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
b
arcode again.
Make a mistake? Scan the CANCEL barcode to
abort and not save the entry string. You can then start
again at the beginning.
CANCEL
$CP4L2
~
DEFAULT
Length 2 is 2,710 Characters