Programming Reference Guide

Enter/Exit Programming Mode 1D Code Selection

116 HP Wireless Barcode Scanner

Standard 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for Standard 2 of 5 Length Control. Length

1 is the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed

Length Mode. Length includes the barcode’s check and da

ta characters. The length can be

set from 1 to 50 characters.

Table 9 provides some examples for setting Length 1.

See page 219 if you want detailed

instructions on setting this feature.

Table 9. Standard 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Character 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Standard 2 of 5 Length 1 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CS2L1

DEFAULT

08 = Length 1 is 8 Characters