HP Business Notebook and Desktop PC F10 setup overview Technical White Paper Technical white paper

Feature Function Default setting,

if applicable

Reboot

required

• Unconfigure AMT on

Next Boot

Resets AMT configuration options on next boot, Disabled Yes

• SOL Terminal

Execution Mode

Specifies terminal emulation mode ANSI Yes

• Firmware Progress

Event Support

Enables AMT progress events, allowing the status of clients to be

monitored remotely

Disabled Yes

• Initiate Intel CIRA Enables Intel CIRA feature Disabled Yes

HP Always On Remote

Management Options

N/A

• Status Read only. Indicates the current state of the feature, either

Activated, or Not Activated

Not Activated N/A

• Allow Activation Allows enrollment when enabled or un-enrolls and blocks any

current enrollment if disabled

Enabled Yes

• Accept Commands Only available when Allow Activation is Enabled. Setting to While

set to disabled, the platform will not accept commands from HP

Touchpoint Manager

Disabled Yes