Intel vPro Processor Technology Setup and Configuration for the HP Z1, Z210, Z420, Z620 and Z820 Workstations

6. Review system information and make any necessary changes.

Note:

The MEBx password can be changed for the remote

system in the WebGUI.

Changing the password in the WebGUI or a remote

console will result in two passwords. The new password,

known as the “remote” MEBx password, will only work

remotely with the WebGUI or remote console. The local

MEBx password used to access the MEBx locally will not

be changed! The user will have to keep track of both local

and remote MEBx passwords to be able to access the

system MEBx locally and remotely. When the MEBx

password is initially set in AMT Setup, it serves as both the

local and remote password. They are in sync. If the remote

password is changed, then the passwords are out of sync.

The remote MEBx password must also follow the criteria

defined in the Password Guideline section for a strong

password.

7. Exit.