Intel vPro Processor Technology Setup and Configuration for the HP Z1, Z210, Z420, Z620 and Z820 Workstations

12. Select Password policy. This option will determine if the local MEBx password

can be modified from a remote console.

Default (and recommended) setting: Default Password Only

Option Effect

Default Password Only This option will allow the MEBx password

to be remotely modified only if it is the

default “admin” password.

During Setup and Configuration This option will allow the MEBx password

to be remotely modified only during

Setup and Configuration of the AMT

platform.

Anytime This option will allow the MEBx password

to be remotely modified at any time.

13. Select Network Setup. Enter a Host Name (spaces are not accepted).

Default setting: (None)

Recommended setting: (User dependent)

14. In the Network Setup menu, select TCP/IP.

a. Wired LAN IPv4 Configuration.

DHCP Mode

Default setting: DHCP Enabled

Recommended setting: (User dependent. For the purposes of this paper,

DHCP is enabled.)

b. Wired LAN IPv6 Configuration.

Default setting: Disabled

Recommended setting: (User dependent. For the purposes of this paper,

DHCP is enabled.)

i. IPv6 interface ID Type.

RANDOM ID (default) - The IPv6 Interface ID is automatically

generated using a random number as described in RFC 3041.

Intel ID - The IPv6 Interface ID is automatically generated using the

MAC address.

Manual ID - The IPv6 Interface ID is configured manually. Selecting

this type requires that the Manual Interface ID is set with a valid value.

ii. IPv6 Address. Enter a static IPv6 address.

Default setting: (None)

Recommended setting: (Network dependent)

Example: 2001:db8::1428:57ab

iii. IPv6 Default Router. Enter the IPv6 default router address.

Default setting: (None)

Recommended setting: (Network dependent)

Example: 2001:db8::1428:57ab