Intel vPro Processor Technology Setup and Configuration for the HP Z1, Z210, Z420, Z620 and Z820 Workstations

38
Q: If TLS is not used, then what is used?
A: HTTP Digest will be used for mutual authentication if TLS is not used.
Q: Who provides Setup and Configuration Servers?
A: HP Client Configuration Manager and ISVs such as Altiris provide Setup and
Configuration Servers. Check with your management console supplier to see if they
offer this service.
Q: Can AMT be set for static address and the OS set for DHCP or vice versa?
A: No. Although it can be done, this is not a supported setting by Intel and may
cause unexpected system behavior.
Q: What is the default port used by the Intel WebGUI?
A: The Intel WebGUI listens to port 16992.
Q: What is the difference between the ME and AMT?
A: The ME is the controller that manages AMT along with PAVP. Notice, clearing
AMT settings does not affect ME settings since the ME is a separate entity.
Q: Why does Wake-On-ME not work after the Idle Timeout is set?
A: The Wake-On-ME feature only works if the ME ON in Host Sleep State setting is
set to allow ME WoL and the system is fully provisioned.