Intel Vpro Processor Technology Setup and Configuration Guide

17
i. IPv6 Interface ID Type:
RANDOM ID (default) - The IPv6 Interface ID is automatically generated
using a random number as described in RFC 3041.
Intel ID - The IPv6 Interface ID is automatically generated using the
MAC address.
Manual ID - The IPv6 Interface ID is configured manually. Selecting this
type requires that the Manual Interface ID is set with a valid value.
ii. IPv6 Address. Enter a static IP address.
Default setting: (None)
Recommended setting: (Network depended)
Example
iii. IPv6 default Router. Enter the preferred DNS IPv6 address
: 2001:db8::1428:57ab
Default setting: (None)
Recommended setting: (Network dependent)
Example
iv. Preferred DNS IPv6 Address. Enter the preferred DNS IPv6 address.
: 2001:db8::1428:57ab
Default setting: (None)
Recommended setting
v. Alternate DNS IPv6 Address. Enter the alternate DNS IPv6 address.
: (Network dependent)
Default setting: (None)
Recommended setting: (Network dependent)
Example
16. Activate Network Access. From the Intel ME Platform Configuration menu Figure
22), select Activate Network Access. This function causes the Intel ME to
transition to the POST provisioning state if all required settings are configured.
The Un-configure Network Access option will cause the Intel ME to transition to
PRE provisioning state.
: 2001:db8::1428:57ab
Figure 22. Intel AMT Activate Network Access Screen
When MEBx displays “Update Network settings” in the General Settings menu
press Enter.